毕业普通车床主轴箱设计.docx

普通车床主轴箱设计 摘要：普通车床主轴箱的设计，先通过研究背景及选题意义的介绍，来引出设计 的意义，然后分别从传动结构式，结构网的选择，转速图的拟定，齿轮齿数的确 定和模数的计算，齿宽的确定，传动系统的设计，结构设计及说明来进行设计。 并利用三维画图软件进行零件的设计和处理，画出零件图，结构装配图。 运动设计：主轴转速，传动比的设计；结构设计：做出结构设计的内容， 技术要求，设计方案。展开图的布置，齿轮，主轴组件的设计。 关键词：车床，主轴箱，零件传动，主轴组件 Ordinary lathe spindle box design Abstract: Lathe headstock design, first by studying the background and significance of the topic of the presentation, designed to elicit meaning, then from the drive structure, the structure of the network of choice, speed chart intended to determine and calculate modulus gear respectively, tooth width is determined, the transmission system design, checking spindle stiffness, structural design and instructions for design. And the use of three-dimensional design and drawing software processing components, draw parts diagram, structure assembly drawings. Motion Design: spindle speed, gear ratio design; structural design.structural design to make the contents of the technical requirements, design. Expand design layout, gear, the spindle assembly of FIG. Key words: Lathe headstock, transmi ss i on parts, spindle assembIy. TOC \o 1-5 \h \z HYPERLINK \l bookmark4 \o Current Document 1绪论 1 HYPERLINK \l bookmark6 \o Current Document 1.1课题研究背景及选题意义 1 HYPERLINK \l bookmark8 \o Current Document 1.1.1 课题的背景 1 HYPERLINK \l bookmark10 \o Current Document 1.2课题的目的 3 HYPERLINK \l bookmark12 \o Current Document 1.2完成的内容 1 2参数拟定 错误!未定义书签。 HYPERLINK \l bookmark16 \o Current Document 1主电机动力参数的确定 5 HYPERLINK \l bookmark18 \o Current Document 2. 2运动设计 6 2. 2确定转速范围%定公比°确定主轴转速数例： 6 HYPERLINK \l bookmark26 \o Current Document 3传动设计 7 HYPERLINK \l bookmark28 \o Current Document 3.1传动方案拟定 7 HYPERLINK \l bookmark30 \o Current Document 3.1.1传动组和传动副数的确定 7 HYPERLINK \l bookmark32 \o Current Document 3.2传动结构式的选择 8 HYPERLINK \l bookmark34 \o Current Document 3.2.1基本组和扩大组的确定 8 HYPERLINK \l bookmark36 \o Current Document 3.2.2分配总降速比 9 HYPERLINK \l bookmark38 \o Current Document 3.3带轮直径和齿轮齿数的确定及转速图拟定 10 HYPERLINK \l bookma