滴剂瓶盖注塑模具CAD设计.docVIP

沈阳化工大学学士学位论文 Abstract PAGE 本 科 毕 业 设 计 题 目：滴剂瓶盖注塑模具CAD设计 沈阳化工大学学士学位论文 内容摘要 沈阳化工大学学士学位论文 内容摘要 内容摘要 塑料制品已在工业、农业、国防和日常生活中得到广泛的应用，特别是在电子工业中更为突出。电子产品的外壳大部分是塑料制品，产品性能的提高要求高质量的塑料模具、塑料性能、成型工艺和制品的设计。? ? 塑料制品的成型方法很多。其主要是注射、挤出、压制、压铸和气压成型等。而注射模，挤出约占成型总数的60%以上。注射成型分为加料、熔融塑料、注射制件、冷却和制件脱模等五个步骤。当然如利用电气控制,可实现半自动化或自动化作业。? ? 塑料注射模主要用于塑料制品的成型，它是塑料制品生产中十分重要的工艺装置。注射模的基本组成是：定模机构，动模机构，浇注系统，导向装置，顶出机构，芯机构，冷却和加热装置，排气系统。 本文详细介绍了滴剂瓶盖注塑模具的设计过程。首先分析原始资料，包括塑件材料的性能和结构工艺特点，然后确定分型面和型腔排列方式，接着设计侧抽芯机构以及导滑槽和滑块，还对成型零件、型腔壁厚、加热和冷却等进行了计算，最后对注塑机进行校核。本设计介绍了中等复杂程度注射模具的设计过程，并对模具设计进行优化和改进,提高了模具设计的质量，缩短了设计时间。 关键词： 滴剂瓶盖； 注塑模具； 设计 沈阳化工大学学士学位论文 Abstract 沈阳化工大学学士学位论文 Abstract Abstract The plastics products to have already with daily life wait the aspect to acquire the extensive application at the industry, agriculture, national defense. Especially in the electronic industry then and particularly for outstanding. Electronics product that the outer shell spare parts that exaltation is mostly plastics function that requests the high quantity, Type craft with product the design. The plastics product of the type method is a lot of. Among them most of inject, die-casting to compatibly press type etc. But inject the mold, extrude, extrude roughly share type total amount of 60% above inject the type is divided in to add the material, meltdown plastics, and inject to make piece to cool off with make the piece to take off the mold to wait five steps. Certainly if make use off the electricity control. Can realize half auto or automatic homework. Mainly used for plastic injection mold molding plastic products, plastic products it is a very important process plants. The basic composition of injection mold: the fixed mold body, the dynamic model agencies, casting systems, guiding device, top the body, core body cooling and heat