ML5238手册 16系列锂离子二次电池保护，模拟前端IC.pdfVIP

FEDL5238-05 Issue date ： Jan. 22, 2014 ML5238 16 series Li-ion secondary battery protection, Analog Front End IC  GENERAL DESCRIPTION The ML5238 is analog front end IC for 16 series Lithium Ion secondary battery pack protection system. The ML5238 provides the function of cell voltage monitoring, charge/discharge current monitoring function, and it can detect over-charge/over-discharge of each battery cell charge/discharge over-current. The ML5238 has short current detecting function which can turn off the external charge/discharge MOS-FET without external MCU.  FEATURES • 16 cell highly accurate voltage monitoring function: output cell voltage by half from VMON pin • built-in cell balancing switches for each cell • charge/discharge current monitoring function : Select voltage gain of ISP-ISM and output from IMON pin. Voltage gain selection: x10 / x50 • short current detecting function: detecting threshold voltage is selectable, ISP-ISM voltage = 0.1V/0.2V/0.3V/0.4V (typ), the detecting delay time is set by external capacitor • external charge/discharge FET control: NMOS-FET driver built-in • MCU interface: SPI serial interface (mode 0) • 3.3V regulator for external MCU built-in: output current is 10mA (max) • Reference voltage regulator for external ADC: 3.3V(typ), 3.28V(min),3.34V(max) @Ta=-10°C to +60°C • Small power consumption Normal state : 50µA (typ), 100µA (max) Power save state : 25µA (typ), 50µA (max） Power down state : 0.1µA (typ), 1µA (max) • power supply voltage : +7V to +80V • operating temperature : -40°C to +85°C • package : 44 pi