制造技术(中英文课件14)..pptVIP

1.The composition of the base metal which determines the electrode composition. （母材的成分决定着电极的成分）2. The tensile strength of the required joint. （（要考虑）所需求接头的抗拉强度）3. The thickness of the base metal. For thinner metals the current setting should be lower. （ （要考虑）母材的厚度。对于薄板电流整定值应该低一些。）4. The required metal deposition rate. （（要考虑）要求的金属的熔敷率。） The electrodes for the welding operation should be selected properly, the main points to be considered are:（选择电极主要考虑以下几个要点） 作业讲评 5. The type of arc welding equipment used. DC arc welding equipment would be preferable let overhead welding. （（要考虑）所使用的电弧焊 设备