ISO8407-2009金属和合金的耐腐蚀性.腐蚀试样中腐蚀生成物的清除.pdf

INTERNATIONAL ISO STANDARD 8407 Second edition 2009-11-01 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens Corrosion des métaux et alliages — Élimination des produits de corrosion sur les éprouvettes d'essai de corrosion Reference number ISO 8407:2009(E) © ISO 2009 ISO 8407:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the respons bility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, includ