毕业设计（论文）-压板冲压工艺与模具设计.docVIP

毕业设计 压板冲压工艺与模具设计 学生姓名： 学号： 系 部： 专 业： 指导教师： 二○一四年六月  诚信声明 本人郑重声明：本论文及其研究工作是本人在指导教师的指导下独立完成的，在完成论文时所利用的一切资料均已在参考文献中列出。 本人签名： 年 月 日 压板冲压工艺与模具设计 摘要：根据压板零件的用途和结构特点，对产品进行了冲压成型工艺分析和经济型分析，从而确定工艺方案，采用及进模。模具采用并列双侧刃，保证零件的外形尺寸；采用活动弯曲凸模结构，解决了零件一次弯曲成型和切断过程中可能产生的质量问题。根据零件图的设计要求，进行冲压工艺分析，制定工艺方案，编制零件的加工工艺过程卡。本设计内容还包括：排样图设计，总的冲压力计算机压力中心计算，刃口尺寸计算，弹簧、橡胶件的计算和选用，凸、凹模或凸、凹模结构设计以及其他冲模零件的设计，绘制模具装配图和工作零件图介绍了模具的结构特点、工作过程和设计要点。实际生产应用表明，该模具结构简单，工作可靠生产效率高，取得了较好的经济效益。 关键词：压板，及进模，冲孔，切断，弯曲 Pressure plate stamping process and die design Abstract: According to the structural characteristics of the purpose and clamp parts, stamping forming process of product analysis and economical analysis, so as to determine the processing plan, use and into the mold. Mold the side-by-side blade on both sides, to ensure the appearance of parts size; Using activity bending punch structure, solve the parts once may be produced in the process of bending forming and cutting quality problem. According to the design requirements of part drawing, stamping process analysis, process plan, prepare the parts machining process card. This design content includes: the layout diagram design, the overall impact pressure computer center, edge size calculation, springs, rubber parts of calculation and selection, convex, concave or convex and concave die structure design and the design of other die parts, work drawing die assembly drawing and part drawing die structure characteristics and working process are introduced and the design key points. Actual production application shows that the die structure is simple, reliable production of high efficiency, good economic benefits were obtained. Keywords: plate, and progressive die, punching, cutti