深水钻井隔水管连接作业窗口分析-石油勘探与开发.PDFVIP

2012 2 PETROLEUM EXPLORATION AND DEVELOPMENT Vol.39 No.1 105 文章编号：1000-0747(2012)01-0105-06 深水钻井隔水管连接作业窗口分析 1 1 1 1 2 1 1. 2. 基金项目：2008ZX05026-001-07 863 2008AA09A106 摘要：- - 1.0 m/s 1.0 m/s 7 3 13 关键词： 中图分类号：TE52 文献标识码：A Envelopes for connected operation of the deepwater drilling riser 1 1 1 1 2 1 Ju Shaodong , Chang Yuanjiang , Chen Guoming , Liu Xiuquan , Xu Liangbin , Wang Rongyao (1. Centre for Offshore Engineering and Safety Technology, China University of Petroleum, Dongying 257061, China; 2. Research Institute of China National Offshore Oil Corporation , Beijing 100027, China) Abstract: The common critical criterion and nonlinear search method were adopted for the study of connected operation envelopes of deepwater drilling platform and a riser-wellhead-conductor integral finite element model was established. The combination parameters of drilling platform offset, current speed and slip joint stroke were used to determine the riser operability envelopes. The results show that the drilling envelope has an upconing shape and is limited by lower flex joint angle when the surface current speed is low (less than 1.0 m/s). In downstream direction, when the current speed increases, the rotation angle of the lower flex joint increases and the allowable maximum offset of the platform reduces, but in upstream direction, the conditions will be opposite. When surface current speed exceeds 1.0 m/s, the drilling envelope is limited by upper flex joint angle. When it is in upstream direction, the increase of current flow will increase the rotor angle of the upper f