基于DG并网变压器接地方式和相关零序保护 方案选择.pdfVIP

Smart Grid 智能电网, 2015, 5(5), 252‐261  Published Online October 2015 in Hans. /journal/sg  /10.12677/sg.2015.55030    The Grounding Mode Based on the DG Interconnection Transformer and the Selection of Relevant Zero Sequence Protection Scheme Xia Lin, Yao Li, Qiang Li, Xinying Zhu, Yingbin Zhang Control Center of Zaozhuang Power Company, State Grid Shandong Electric Power Company, Zaozhuang  Shandong  Email: boulevard@126.com    th nd th Received: Oct. 8 , 2015; accepted: Oct. 22 , 2015; published: Oct. 28 , 2015  Copyright © 2015 by authors and Hans Publishers Inc.  This work is licensed under the Creative Commons Attribution International License (CC BY).  /licenses/by/4.0/    Abstract More and more DG is interconnected through the low voltage distribution network; how to choose a protection scheme which doesn’t depend on the nature of DG, and find a reliable operation mode are a big issue faced by engineers. The rational allocation of interconnection coupling point pro‐ tection scheme not only can judge the system fault in time, but also at the same time can maintain the protective properties in the dynamic process of the formation of island and after the operation mode of island division in DG Island. Always keeping the fault with sufficient selectivity within the island is the problem to be solved in this study. This paper analyzed the relationship between the zero sequence current and zero sequence voltage through the selection of the grounding method of the DG interconnection transformer; the optimization of the protection scheme can realize the inhibition of zero sequence ov