基于神经网络的链条滴油润滑系统仿真研究-控制理论与控制工程专业论文.docxVIP

西北工业大学硕士学位论文、 西北工业大学硕士学位论文、 ABSTRACT ABSTRACT In this thesis。a Chain Dropping Lubrication System designed by a foreign company is analyzed and researched by neural networks．This system is designed ingeniously and reliably．In compadson to traditional methods，the system can’lubricate effectively and save lubrication greatly．So it is Ve呵 important to do the research to this system by simulation for system optimization and similar system design． It is proved that the oil drop rate of the system is very important for lubricating effect．So．firstly,the system is analyzed by mechanics and hydrodynamics to investigate that the main factors，which influence the lubrication drop rate，especially focus on ambient temperature。lubrication type taper angle and control valve position of the system． Secondly,after Studying the mapping capacity of feed-forward neural network for complicated system and utilizing the BP and RBF neural networks t0 be trained by some selective arithmetic and experimental results，the characteristics of lubrication drop rate vs．main factors modeIis established． Based on the BP networks model，which is optimal between two networks，the system and the structure design that the taper angle of the system’S oil valve is adjusted will be simulated and applied to find which angle will be brought out best performance． Microsoft Visual C++6．0 and MATLAB engine calculation is adopted for the implementation of the simulation program．The compadson of network simulated results and experiment output shows the results are satisfactory． Key Words：Chain Dropping Lubrication System BP Neural Network RBF Neural Network Simulation MATLAB Engine 西北工业大学硕士学位论文 西北工业大学硕士学位论文 第一章绪论 第一章绪论 §1．1研究背景 对机械设备及其零部件进行有效润滑，不但能防止腐蚀、带走摩擦接触面的 杂质和热量，起到冷却和清洗摩擦面的作用，而且可以减小摩擦接触面间的摩擦 和磨损，保证机器设备的安全运行，延长其使用寿命，节约材料及能源。因此对 润滑技术的研究越来越受到人们的重视，其未来发展趋势是高效、节能、环保、 方便、使用范围宽【lJ。 常见的润滑方式有以下几种：手工润滑、油浸润滑、滴油润滑、飞溅润滑、 油绳润滑、油