基于投影栅线法的柱状药表面粘接剂厚度检测方法研究-信号与信息处理专业论文.docxVIP

中北大学学位论文 中北大学学位论文 Research on measuring method of adhesive thickness of solid propellant grain surface by the grating projection Abstract Solid propellant grain’s surface coating a liner, and the quality of the adhesion between grain and liner has directly affects on the solid propellant’s emission properties, while the adhesive thickness is one of the major factors to affect the quality of the adhesion between grain and liner. Therefore, study an automatic detection of the adhesive thickness by non-contact method is significantly important for ensuring the performance of solid propellant grain. Grating projection method is a method for 3D profile reconstruction by using structure light, we extend this method to the thickness measurement, and the solid propellant grain surface’s adhesive thickness measurement with grating projection method is presented. The detection principle of the 3D profile reconstruction with grating projection method is introduced, and the feasibility of the thickness measurement method for solid propellant grain surface’s adhesive is verified . According to the requirements of measurement principle and field environment, the optical structure based on triangle method is designed, which ensures high-precision and high-stability of the detection system. The research highlighted processing of the digital fringe images by Fourier transform profilometry method(FTP), and improved the traditional method for making the image processing algorithm to better meet the requirement of the measurement system, such as the nonlinear correction of fringe by the least square curve fitting method, the spectrum analysis of fringe image by Gabor transform, the extraction of fundamental frequency by the flattened gauss filter,and a new height-calibrating method is applied in the height calculation of solid propellant grain. The detection system is stable working during the simulation experiments, and these measurement results are close to the standard value, the ma