基于涡流加载的电磁声发射实验装置及信号特征研究-电气工程专业论文.docxVIP

基于涡流加载的电磁声发射实验装置及信号特征研究 基于涡流加载的电磁声发射实验装置及信号特征研究 RESEARCH OF ELECTROMAGNETICALLY INDUCED ACOUSTIC EMISSION SIGNALS AND EXPERIMENTAL EQUIPMENT FOR EDDY CURRENT LOAD Abstract Electromagnetically induced acoustic emission (EMAE) uses electro-magnetic stimulation to produce acoustic emission (AE) signals which is used to the nondestructive test. It is a new type of nondestructive test. It allows a structure to be loaded locally by applying an electromagnetic stimulation in order to produce an acoustic emission response. It can locate small flaws or cracks in thin-walled structures nondestructively to allow inspection of specific areas without loading the whole structure. Therefore, it can prevent additional damage for the structure under test. The power which is used for eddy-current load acoustic emission experiments is asked for wide output voltage and frequency range. In this project we adopt digital power supply program which based on DSP through research the feature of power that used for electromagnetic acoustic emission. The power source system consists of main circuit, control circuit and protection circuit. The core of power source system is the control circuit which is based on 32-bit digital signal processor (DSP) chip TMS320F2812, Trigger pulse can be regulated through the variation of the program parameters so the performance of trigger pulse is flexible. The DSP can Real-time monitoring the operation of the circuit. The core of main circuit is Intelligent Power Module designed by Mitsubishi. The purpose of adopting integration module is shortening the period of development and enhancing system reliability. The results of the experiments show that this power source is stable and reliable enough and can meet the electromagnetic acoustic emission experimental requirements. Keywords： electromagnetically induced acoustic emission , digital power source, DSP, SPWM , IPM II 河北工业大学硕士学位论文 河北工业大学硕士学位论文 第一章 绪论 诞生于20世纪后半叶的电力电子技术，为当今世界的飞速发展提供了强劲的动力支持。电源技术作 为电力电子技术的重要应用领