海河干流区域洪涝潮过程的分析与模拟-水利工程;水文学及水资源专业论文.docxVIP

ABSTRACT In recent years, with the continuous development of Tianjin Haihe River region, flood control and the importance of increasing. But in 2012 the July to August continuous rainstorm and flood process, caused the Haihe River area of urban water can not be discharged in time, the suburbs long time, sustained high level of Haihe River water, landscape water problems to the platform, the city has brought great loss.This paper analyses in 2012 the July to August the typical flood, reducing calculation of its,a comprehensive analysis of the flood characteristics, the Haihe River, a comprehensive analysis of the Haihe River flood control capacity calculation, find out the key point of flood control work, put forward the suggestions in response to a similar flood. Based on the comprehensive analysis of the regional convergence process based on the production of heavy rain, the river flow routing model is established by using MIKE11 software, and in 2012 the July to August storm, flood, storm surge processes were simulated by using this model, the experimental results and the simulation results are compared and analyzed. In addition, the Haihe River flood process under different conditions was simulated by using the model, and the calculation results are compared. The characteristics of flood control work area, provides the reference for the regional flood control work in the future. The main research results: In the Haihe River area runoff process was analyzed, method of Area Rainfall Calculation to determine the surface rainfall process, and calculated; analyzes the characteristics of regional runoff, the runoff scheme, the regional land surface area, and has carried on the division of flow calculation, but also the calculation performed the convergence process producing area. On the 2012 rainfall flood process is systematically analyzed, on regional rainfall, runoff, inflow, outflow, storm surge, the comprehensive analysis and calculation, based on Calculation of