毕业论文-数控电源的设计.docVIP

PAGE II 本科毕业论文 （20 届） 数控电源的设计 专业：机械设计制造及其自动化 摘 要：数控直流稳压电源就是能用数字来控制电源输出电压的大小，而且能使输出的直流电压能保持稳定、精确的直流电压源。为此本文利用了D/A转换电路、显示电路、运放电路等组成的数控稳压电源电路，制作了一个0-10V的数控电压源，它具有操作方便，电压稳定度高的特点，其结构简单、制作方便、成本低，输出电压在0-10V之间连续可调，其输出电压大小以0.1V步进，输出电压的大小调节是通过键操作的，而且可以根据实际要求组成具有不同的输出电压值的稳压源电路。该电源控制电路选用AT89S52单片机控制主电路采用串联调整稳压技术具有线路简单、响应迅速、稳定性好、效率高等特点。 关键词：稳压电源,单片微型机,数控直流,D/A转换 Design of the NC Power Abstract: NC is the source DC can be used to control the size of power supply output voltage, but also the output DC voltage to maintain stability, precise DC voltage source ;This article describes the use of D/A converter circuit, auxiliary power supply circuit, go Buffeting NC circuit composed of DC regulated power supply circuit, power supply detailing the basic circuit structure and control stability characteristics, and its simple structure ,easy production ,low cost, the output voltage between 0-10V at continuously adjustable, the size of its output voltage to 0.1V step ,the size of the output voltage regulation through two-button operation and can be requested in accordance with the actual composition of the output voltage with different values of the source voltage regulator circuit, The power control circuit selection 89C51 single-chip control of the main circuit in series with line adjust regulator technology easy, fast response, good stability and high efficiency. Keywords: Numerical control, voltage source, LCD1602,D/A converter 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc293058423 1 绪论 PAGEREF _Toc293058423 \h 1 HYPERLINK \l _Toc293058424 1.1 引言 PAGEREF _Toc293058424 \h 1 HYPERLINK \l _Toc293058425 1.2 数控电压源产生的背景 PAGEREF _Toc293058425 \h 1 HYPERLINK \l _Toc293058426 1.4 系统主要功能 PAGEREF _Toc293058426 \h 2 HYPERLINK \l _Toc293058427 1.5研究中拟解决的主要问题 PAGEREF _Toc293058427 \h 2 HYPERLINK \l _Toc293058428 2 总体设计方案 PAGEREF _Toc293058428 \h 3 HYPERLINK \l _Toc293058429 2.1系统概述 PAGEREF _Toc293058429 \h 3 HYPERLINK \l _Toc293058430 2.2设计思路 PAGEREF _Toc293058430 \h 3 HYPERLINK \