AS14292-1998---电缆-聚合绝缘第二部分工作电压大于.docVIP

AS/NZS 1429.2:1 998 AS/NZS 1429.2:1 998 14 AS NZS 1429.2-1998 PAGE 27 COPYRIGHT COPYRIGHT Australian/New Zealand Standard? 澳大利亚/新西兰标准? Electric cables—Polymeric insulated Part 2: For working voltages above 19/33 (36) kV up to and including 76/132 (145) kV 电缆－聚合绝缘 第二部分：工作电压大于19/33 (36) kV时，电力供应小于等于76/132 (145) kV This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee EL/3, Electric Wires and Cables. It was approved on behalf of the Council of Standards Australia on 17 November 1997 and on behalf of the Council of Standards New Zealand on 17 November 1997. It was published on 5 February 1998. 本澳/新联合标准由电线和电缆联合技术委员会EL/3编制，并以澳大利亚标准委员会的名义于1997年11月17日获得审批通过，以新西兰标准委员会的名义于1997年11月17日获得审批通过。并于1998年2月5日出版。 The following interests are represented on Committee EL/3: EL/3委员会由以下单位参加: Australasian Railways Association 大洋洲铁路委员会 Australian Electrical and Electronic Manufacturers Association 澳大利亚电气和电子制造商委员会 Department of Defence, Australia 澳大利亚国防部 Electrical regulatory authorities 电气管理机构 Electricity Supply Associated of Australia 澳大利亚供电协会 Institution of Engineers, Australia 澳大利亚工程师协会 Ministry of Commerce, New Zealand 新西兰商业部 New Zealand Electrical Contractors Association 新西兰电气承包商协会 New Zealand Electrical and Electronic Manufacturers Federation 新西兰电气和电子制造商联盟 Office of Energy, N.S.W. 新南威尔士能源局 Testing interests 检测机构 Review of Standards. 标准的审议 To keep abreast of progress in industry, Joint Australian/ New Zealand Standards are subject to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto. 为了使澳大利亚/新西兰联合标准与业界的科技进步齐肩并进，我们定期对其进行审议，并发布必要的增补修订或通过新的版本，使之不断与时俱进。因此，标准用户务必确保自己拥有最新版本和最新修正的内容。 Full details of all Joint Standards and related publications will be found in the Standards Australia and Standards New Zealand Catalogue of Publications; this information is supplemented each month by