多功能8位十进制频率计数器的研究与设计开发.docVIP

孔文尧：8位十进制数字频率计的设计 江西理工大学应用科学学院毕业设计 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT III PAGE \* MERGEFORMAT III 1 多功能8位十进制频率计数器的设计 设计题目： 多功能8位十进制计数器的设计 学生学号： 08060311205 学生姓名： 孔 文 尧 专业班级： 电 信 112 指导教师： 邓 茜 摘要 使用VHDL 语言来设计，画出流程图和仿真图，让设计的电路通过硬件仿真，再在下到相关器件上，指导满足要求，能实现电子自动化的过程。使用该仪器测试所得到的信号的频率，有正弦波，有方波但是其信号必须按周期性变化，否则一定是机器坏了和操作不得当。因此这个毕业设计，不但有力于让数字频率计的功能更强，也可以让成本降低和增加其实际作用。所有的科研院所，学校，实验室，车间等商业机构都使用了大量的数字频率器或其相关产品。因为它的使用性，价格也相当的低廉所以被人们广泛的使用和研究。在这被人们所注意到，而且仿真可以提供更好的测量频率也会让实验的结果更加的精确，他能满足了数字频率计自动清零需求，当然也能满足自动化功能测试要求。 现在我们对他的研究途径它不仅仅在于容易阅读，也在于我可以控制精度，这也是很牛逼的。最重要的是数字频率计，在高科技设备研发和数字卫星领域，数字通信应用等领域中有不俗的贡献。 [关键词]：VHDL 语言 仿真 频率计数器。 Summary Use c language to design, draw a flowchart and simulation map, so the design of the circuit by hardware emulation, and then next to the relevant device guidance to meet the requirements, to achieve the electronic automated process. Frequency signal obtained by the instrument test with a sine wave, but their well-wave signal must be periodically changed, the machine must be broken and the operation shall not be treated. So this graduation design, not only to make powerful digital frequency meter more powerful, but also allows cost reduction and increase its practical effect. All research institutes, schools, laboratories, workshops and other business organizations are using a lot of digital frequency or its related products. Because of its use, the price is quite low so been widely used and studied. In this been noticed, and simulation can provide better measurement frequency also make experimental results more accurate, he can meet the needs of the digital frequency meter is automatically cleared, of course, but also to meet the requirements of automated functional testing, Now we study the way for him its not just that it is easy to read, but also that I can control precision, it is also very fast hardware. The most import