abs船级社关于ais在船测试报告的格式.docVIP

AMERICAN BUREAU OF SHIPPING CHECK SHEET ON SOLAS SURVEYS –“ AIS” RADIO TECHNICIAN’ S SURVEY (ORIGINAL TO BE RETAINED ONBOARD BY VESSEL’ S MASTER) VESSEL CLASS NO. Associated REPORT NO. DATE AUTOMATIC IDENTIFICATION SYSTEM (AIS) Test Report Ship ’ s details: CALL SIGN MMSI NUMBER PORT OF REGISTRY IMO NUMBER GROSS TONNAGE DATE KEEL LAID OFFICIAL NUMBER Inspection Details NAME OF RADIO TECHNICIAN COMPANY INSPECTION DATE INSPECTION LOCATION 1. Installation details Item Status 1.1 AIS transponder type: 1.2 Type approval certificate 1.3 Initial installation configuration report on board? 1.4 Drawings provided? (Antenna-, AIS-arrangement and block diagram) 1.5 Main source of electrical power, 1.6 Emergency source of electrical power, 1.7 Capacity to be verified if the AIS is connected to a battery 1.8 Pilot plug near pilots operating position? 1.9 120 V AC provided near pilot plug? (Panama and St. Lawrence requirement) 2. AIS programming - Static information 2.1 MMSI number 2.2 IMO number 2.3 Radio call sign 2.4 Name of ship 2.5 Type of ship 2.6 Ship length and beam 2.7 Location of GPS antenna AIS programming - Dynamic information 3.1 Ships position with accuracy and integrity status (Source: GNSS) 3.2 Time in UTC (Source: GNSS) 3.3 Course over ground (COG) (will fluctuate at dockside) (Source GNSS) 3.4 Speed over ground (SOG) (zero at dockside) (Source: GNSS) 3.5 Heading (Source: Gyro) 3.6 Navigational status 3.7 Rate of turn, where available (ROT) 3.8 Angle of heel, pitch and roll, where available AIS-TECH Revision 0 Page 1 of 2 VESSEL CLASS NO. Associated REPORT NO. DATE AIS programming - voyage related information 4.1 Ships draught 4.2 Type of cargo 4.3 Destination and ETA (at masters discretion) 4.4 Route plan (optional) 4.5 Short safety-related messages Performance test using measuring instrument 5.1 Frequency measurements AIS ch. 1 and 2, GMDSS ch. 70 5.2 Transmitting output, AIS ch. 1 and 2, GMDSS ch. 70 5.3 Polling information ch. 70 5.4 Read data from AIS 5.5 Sen