流程图 pcb mfgflow chart资料.pptVIP

HOLE SIZE AND DENSITY (2) HOLE SIZE PANEL DEPTH 0.014” -0.020” GREATER 3 DEEP 0.012” 2 DEEP 0.010OR LESS 1 DEEP * NUMBERS BASED ON STANDARD 0.062” BOARD THICKNESS. * REDUCING FROM 3 DEEP TO 1 DEEP INCREASE COST BY APPROXIMATELY 15% * REDUCING FORM 3 DEEP TO 2 DEEP INCREASECOST BY APPROXIMATELY 4-5% 0.021” GREATER 4 DEEP PAD SIZE VS. HOLE SIZE THE ANNULARS RING CALLOUT ON THE CHART DOES NOT APPLY