移动物料信息分布式传输方法与应用.docVIP

移动物料信息分布式传输方法及应用 魏菊霞 （金川集团股份有限公司 甘肃.金昌 737100） 摘要：在流程工业生产中，移动物料计量信息的传输普遍采用电台和无线模块。接收电台周围环境严重影响计量信息的传输效果，尤其是钢结构厂房、电磁干扰区内，数据传输过程中的丢包率、误码率相当严重。本文提出一种多节点分布式传输方法，根据各个生产作业区环境条件设置相应的WIFI节点数，实现对作业区的无线信号覆盖。网络覆盖区内无线模块、PDA终端（PDA）、终端查询设备通过节点工作频段和阵列天线自适应调节，实现数据传输最佳化。铜熔炼生产现场测试表明，可以有效消除周围环境的电磁干扰，数据丢包率低于0.1%。 关键词：分布式传输；WIFI节点；自适应调节；阵列天线；丢包率 中图分类号：TP 文献标志码：B A method application for distributed transmission in Mobile material metrology information Wei Juxia (JINCHUAN GROUP CO., LTD. Jinchang 737100,China) Abstract: In the process of industrial production, the transmission, metrical information of mobile material, is widely used in radio station and wireless module. Environment around receiving radio station, especially the steel structure workshop, seriously affects information transmission effect. In this case, the pocket loss rate and bit error rate are quite serious in the process of data transmission. In this paper, a multi-node distributed transmission method is proposed. According to environment conditions in each production area, the appropriate number of WIFI nodes is set, which can be covered by radio signal in the entire production area. Wireless modules, PDAs and terminal inquiry devices adjust adaptively by WIFI node’s frequency bands and antenna arrays to optimize data transmission. Copper smelting production field test shows that the method can effectively eliminate the electromagnetic interference of the surrounding environment, and data pocket rate is less than 0.1%. Key words: distributed transmission; WIFI node; self-adaption; HYPERLINK /link?url=_TOWWYKO041ur57noUoL99ORgvFQJbotqdyRTV_tEQPIXQD0dXuaWG9UYP2_X1UOFNS_iWlj7Ero9_G5-jD_5xQQH6VkcsubmLOurMDh5669wSkA2-eeWRs7Od7aCFAKwd=eqid=8108420000000356c11baf \t _blank antenna array; packet loss rate 0 引言 移动物料计量是冶金炉窑实现投入产出在线计算和进行金属平衡计算的前提条件，也是金属冶炼生产中产品质量控制的关键环节。传统的移动物料计量信息传输普遍采用无线电台接收和无线终端模块发射方式。无线电台经过多年发展，经历从模拟信号调制向数字传输的演变过程，传输速率、安全可靠性有一定的提高。无线电台可以用于组建通讯点数不多、传输数据流量小的无线网络【1,2】。由于无线电台采用无线设备终端逐一扫描的工作