单片机与PC机串行通信系统硬件及上位机程序设计.docVIP

PAGE PAGE 15 河南农业大学 本科生毕业论文（设计） 题 目 单片机与PC机串行通信系统设计 学 院 机电工程学院 专业班级 电子信息工程07级3班 学生姓名 高岚 指导教师 胡建东 撰写日期：2011年 5 月 17 日 摘 要 随着计算机技术尤其是单片微型机技术的发展，单片机被广泛应用在工业控制系统中。单片机具有体积小、价格低廉、开发应用方便、可应用于恶劣工业环境的特点，在分布式控制系统中多采用单片机进行数据采集和现场控制。由于单片机的计算能力有限，难以进行复杂的数据处理，因此在功能复杂的控制系统中常采上位机下位机系统，单片机用作下位机进行数据采集和设备控制，而PC机用做上位机进行复杂的数据处理和对单片机的控制。因此如何实现PC机与单片机之间的通信具有重要的现实意义。 论文详细介绍了单片机与PC机通信的软硬件实现。在硬件设计中，单片机系统与PC机系统通过RS-232串行通信端口进行互连，单片机系统将由PC 机传输过来的数据信息动态的显示在LED数码管上。在软件设计中，采用Visual Basic 6.0中的MSComm通信控件设计PC上的串口通信程序。 关键词：单片机；串行通信；VB6.0；RS-232；LED数码管  Design of a serial Communication system between MCU and personal computer Abstract Along with the development of computer, especially the technology of MCU, MCU are widely used in the system of industry control. Small size, low price, the convenience of development and application and high adaptability are its peculiarities, respectiviely. It is usually used in distributed system to collect data and control on the scene. Owing to the limit of calculation, it is difficult to process complex data. Therefore, PC lower level computer system is often applied in functionally complex system. MCU collects data and control equipments as Downside machine, while PC makes complex data processing and the control of MCU. SO how to realize the communication between PC and MCU is practically meaningful. The essay introduces the communication between PC and MCU realized by soft and hard ware in details. IN design of hardware, MCU is connected with PC by the serial port of RS-232 and display the data passed by PC on the LED dynamically. In design of software, program of serial port are designed by MSComm communication control in the language of Visual Basic 6.0. Key Words: MCU; Serial Communication; VB6.0; RS-232; LED 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc293397839 1 引言 PAGEREF _Toc293397839 \h 1 HYPERLINK \l _To