玻璃成型机电控制系统设计.docVIP

毕业设计(论文) 玻璃成型机电控制系统设计 THE DESIGN OF A ELECTRICAL CONTROL SYSTEM ON GLASS MOLDING MECHANICAL 学生姓名 学院名称 专业名称 指导教师 20**年 5月 27日 徐州工程学院毕业设计(论文) PAGE 30 摘要 玻璃成型机的控制系统在国外己经较普遍，但在我国国内对于这方面的研究还是比较少，因此国产的控制系统几乎没有，这就更加有了对此系统进行改造的必要性。 本课题设计阐述了小功率金属卤化灯玻璃成型机控制器的原理及其中的主要问题的解决办法，并利用PLC完成该系统的设计。机械方面具体内容有滚珠丝杠和齿轮设计。控制部分各硬件的设计包括各硬件的选择、控制电路和操作面板的设计。软件部分包括工艺功能图、软件流程图的设计和程序的设计。 关键词 PLC；小功率金属卤化灯；玻璃成型机；控制系统 Abstract At present our country majority of trip-hop machine control system is from the overseas introduction. Not only the cost is expensive, and at support etc. square and also very inconvenient, once appearing fault to have the probability to stop production. This was serious to obstruct the normal capacity of business.Aim at this condition, reply to trip-hop machine control system to carry on a remould, make its localization, this is originally the design the main purpose of system Trip-hop machine control system in overseas oneself after universal , but the search in this aspect of our country domestic for is still less, therefore domestic of the control system almost have no, this had the necessity to carry on a remould vs this system more. This topic design elaborated Small power metal halogenating lamp to trip-hop the priniple of the machine controller and the solution of the key problems in it, and make use of the design that PLC completes the system to develop. Keywords PLC Small power metal halogenating lamp Trip-hop machine Control system 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc296019375 摘要 PAGEREF _Toc296019375 \h I HYPERLINK \l _Toc296019376 Abstract PAGEREF _Toc296019376 \h II HYPERLINK \l _Toc296019377 1 绪论 PAGEREF _Toc296019377 \h 1 HYPERLINK \l _Toc296019378 1.1 玻璃成型机控制系统概述 PAGEREF _Toc296019378 \h 1 HYPERLINK \l _Toc296019379 1.1.1 玻璃成型机的组成 PAGEREF _Toc296019379 \h 1 HYPERLINK \l _Toc296019380 1.1.2 玻璃成型机控制系统的现状和发展趋势 PAGEREF _Toc296019380 \h 3 HYPERLINK \l _Toc296019381 1.2 课题研究的内容 PAGEREF _Toc296019381 \h 4 HYPERLINK \l _To