测压管路对抽蓄机组过渡过程测试结果的影响.pdfVIP

测压管路对抽蓄机组过渡过程 测试结果的影响 唐拥军，邓 磊，周喜军，刘 锋 (国网新源控股有限公司技术中心，北京100161) 摘要：抽水蓄能机组具有水头高、转速快的特点，这使得水力过渡过程，尤其甩负荷成为机组安全运行所关注的 焦点。采用经验模态分解方法EMD对某抽蓄机组甩100％额定负荷过程的压力进行了分析，结果发现长测压管路对 压力脉动中的高频成分有明显的衰减作用，此外，还会产生一些由测量管路引入的额外频率成分，从而造成测量结 果与真实值存在偏差。因此，在实际测量中，建议压力测点布置应尽可能地接近被测量部位。 关键词：过渡过程；压力；EMD；测压管路；抽蓄机组 InnuenceofPiezometricOnTransientProcessTestResultof Unit Pipe Pumped-stOrage TANG Lei，ZHOU Yongjun，DENGXijun，LIUFeng CenterofStaleGrid (Techn0109y XinyuanCompanyLtd．，Beijing10016l，China) Abstract：Asthecharacteristicsof headandfast of the transient unit， highoperating rotatjngspeedpumpeds“Jrage hydraulic load becomesthefocusofthe ofun“．An on process reject especially safetyopera“on analysiswate。pressurepulsationduring 100％ratedload ofoneunitiscarriedoutwith Mode itisfoundthatthe rejectprocess method，but Empi“calDecomposition has on eff色ct of andsomeextra longpiezometricpipe obviouslydamped high f}equencycomponentpressurepulsation， f}equency are duetothe Asa thereadeviationbetween and is value true componentsgenerated piezometricpipe． result， measuring value． itis thatthelocationof be closeto asfar Therefore， should proposed pressuremeasuringpoint arranged measuringpan