胎压监视系统设计.docVIP

本科生毕业设计（论文） PAGE IV 摘 要 随着汽车的普及，汽车行驶安全愈来愈受到重视，而轮胎压力异常是危及汽车行驶安全的重要因素之一。因此，实时监测汽车轮胎压力有着重要的意义。论文以此为背景，设计了直接式汽车轮胎压力监测系统。轮胎的压力和温度通过传感器检测，并通过无线数据传输方式将压力信息传输至监视终端，实现了实时监测汽车轮胎压力的功能，对汽车行驶安全起到了重要的作用。 论文在需求分析的基础上提出了总体设计方案，并进行软硬件设计。硬件设计综合运用了检测技术、单片机技术及无线通信技术，其中发射模块能实时检测、处理轮胎的压力和温度参数，并运用无线方式将处理后的数据传输到接收模块。 能校验数据并显示结果，用以告知驾驶员各个轮胎的情况。系统硬件中央接收处理模块和胎压测量发射模块两部分组成。中央接收处理模块以MC68HC908KX8微控制器；胎压测量发射模块由MPXY8020A传感器及发射芯片MC68HC908RF2组成。软件设计包括中央处理模块和胎压测量发射模块。实现了无线数据发送和数据接收处理的功能。 关键词：胎压监视；MPXY8020A；MC33594；MC68HC908KX8； MC68HC908RF2； Abstract With the popularization of cars, more attention is paid on cars’ security. The abnormal tire pressure is the main threaten of vehicle driving safety. Therefore, the real-time monitoring of tire pressure has a significant meaning. Based on the fact, a direct tire pressure monitoring system was designed. The tire pressure and temperature was measured by sensors, and transported to terminal through the wireless data transmission. The system performs a real-time monitoring of the tire pressure and plays an important role in car safety. Software and hardware design was proposed after the demand analysis. Hardware circuit mainly uses sensor detection technology, single-chip technology and wireless communication technology, transmitter module can detect，deal with the tire pressure and temperature parameters real—time，and transmitted data processed to the receiver module use the way of wireless．Receiver module calibration data and display the result to inform the driver of the situation of all tires. The hardware was composed of central receiving module and tire pressure measurement transmitting module. MC68HC908KX8 microcontroller existed as the core of the central receiving and processing module. In addition, this module had an expansion of wireless receiver circuit. The tire pressure measuring transmitter module was constituted of MPXY8020 Key words：TPMS; MPXY8020A; MC68HC908RF2; 目 录 TOC \o 1-3 \f \h \z HYPERLINK \l _Toc296878950 第1章 绪 论 PAGE