压砖机毕业论文.doc

压砖机毕业论文 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I 压砖机毕业论文 全自动压砖机液压控制设计 摘要 KDQ1300墙体砖全自动液压压砖机是一种利用工业废渣非粘土资源生产墙体砖的关键装备。用于生产标准墙体砖及各种空心砖、铺地砖、透水砖、空心砌块等产品。适用于不同原材料体系及不同工业配方，生产不同类型的产品，如粉煤灰蒸压砖、灰砂蒸压砖、工业废渣水泥砌块等。 国产压砖机的技术参数、技术性能等己达到或部分超过国外先进压砖机的水平，但液压系统的设计主要借助于经验，而理论上的研究工作较少。因此，对自动压砖机的液压系统理论基础仅进行研究，为改进、优化液压系统，提高压制次数，缩短循环时间，提升压砖机的产能提供理论支持有一定的积极意义。本文主要任务就是了解液压压砖机的液压系统。同时根据压力和流量这两个液压系统的主要参数来选择液压元件、辅件和原动机的规格。 本次设计采用Solidworks对泵站、阀块进行三维建模，再生成CAD图纸，避免直接二维设计效率低，容易出错的缺点，简化液压系统设计。 关键词　压砖机；液压系统 燕山大学本科生毕业设计（论文） 燕山大学本科生毕业设计（论文） PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I Abstract Automatic hydraulic press KDQ1300 wall brick is a non-industrial waste residue of wall tile clay resources in the production of key equipment. For the production of standard wall brick and hollow brick, Paver, permeable bricks, hollow blocks and other products. Suitable for different raw materials system and different industry formulas, producing different types of products, such as autoclaved fly ash brick autoclaved, sand-lime bricks, slag cement blocks. Technical parameters of the domestic press, technical performance has met or that is greater than the foreign advanced level of press, but the design of the hydraulic system with the experience and theoretical research work less. Therefore, the theoretical basis for the hydraulic system of automatic press machine only for research, for improvement, optimization of hydraulic system, increasing repressive times, shortening cycle times, improve the capacity of the press to provide theoretical support, must be positive. Main task of this article is to understand the hydraulic press hydraulic system. Under pressure and flow at the two main parameters of hydraulic system of hydraulic components, accessories and specifications of the prime mover. This design uses three dimensional modeling using Solidworks to pumping stations and valve