各种包装料简介-.pptVIP

各種包裝材料簡介 目錄 一.內包裝材料 二.外包裝材料 三.出貨材料 四.其他材料 一:內包裝材料  1.CARRIER 1.SMD元器件所用包裝材料有:CARRIER TAPE,COVER TAPE,REEL 等. 1.1. CARRIER TAPE:根据EIA-481-B標准, CARRIER TAPE按其寬度可分為:8,12, 16,24,32,56,72~200等,其兩Pocket之 中心值即pitch值根据元器件寬度可取 8,12,16,20,24等. 1.2.8mm,12mm punched carrier tape dimensions(Figure1) 1.CARRIER TAPE 1.3. 8mm,12mm punched carrier tape dimensions requirements(Table 1) 1.4. Note1:The cavity defined by A0,B0 and T shall surround the component with sufficient clearance that: a) The component does not protrude be-