ANSYS nCode DesignLife软件介绍 第四讲 Lecture 4 DesignLife Interface.pdfVIP

Introduction to ANSYS nCode DesignLife Customer Training Material Lecture 4: DesignLife Interface Introduction to ANSYS nCode DesignLife Agenda Customer Training Material • Discuss pre-defined ANSYS nCode DesignLife systems • Discuss DesignLife workspace • Explain differences between data and processes • Explain how the 5-box trick represents CAE fatigue analysis • Discuss types of load mapping • Review the Glyph palette ANSYS, Inc. Proprietary Release 14.5 © 2013 ANSYS, Inc. All rights reserved. L4-2 April 20133 Introduction to ANSYS nCode DesignLife Accessing DesignLife Customer Training Material • ANSYS nCode DesignLife is accessed from WB project page – highlight Solution cell RMB Edit • opens DesignLife in separate window ANSYS, Inc. Proprietary Release 14.5 © 2013 ANSYS, Inc. All rights reserved. L4-3 April 20133 Introduction to ANSYS nCode DesignLife Predefined ANSYS nCode DesignLife Processes Customer Training Material • Seven ANSYS nCode DesignLife processes are predefined as WB analysis systems – Stress-Life (SN) – uses time based FE stresses • constant amplitude loading • time step loading • time series loading – Strain-Life (EN) – uses time based FE strains • constant amplit