基于差分进化算法的离心式压缩机建模-JournalofNortheastern.PDFVIP

第33 卷第4期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol133,No.4 2012 年 4 月 Journal of Northeastern niversity( Natural Science) Apr. 2 0 12 1,2 1 1 1, 2 牛大鹏 , 王小刚, 董世建 , 王福利 ( 1. , 110819; 2. , 110819) : , CCPP # ,, # ,,# : ;; ; ; : TP 274 : A : 1005-3026(2012) 04-0457-04 Centrifugal Compressor Modeling Based on Differential Evolution Algorithm 1, 2 1 1 1, 2 N I U Da-p eng , WAN G X iao-gang , DON G Shi-j ian , WA N G Fu-li ( 1. School of Information Science Engineering, Northeastern niversity, Shenyang 110819, China; 2. State Key Laboratory of Synthetical Automation for Process Industries, Northeastern niversity, Shenyang 110819, China. Corresponding author: NI Da-peng, E-mail: niudapeng @ ise.neu.edu. cn) Abstract: T he mechanism model of single stage compressor was built on the basis of the centrifugal compressor. s characteristics, the fluid mechanics, the energy conservation and the mass conservation principles. Several models of single stage compressors in series were integrated to compose the mechanism model of a steel CCPP gas system. s three-level centrifugal compressor on the low pressure side. The parameter identification problem of the mult-i stage compressor model was transformed into an optimization problem, and differential evolution algorithm was used to decide the unknown parameters in the model. Model validation results showed that the developed model could reflect the operating characteristics of centrifugal compressors and laid a mod