pcb天线设计参考(TI公司).pdfVIP

Design Note DN031 CC-Antenna-DK and Antenna Measurements Summary By Richard Wallace Keywords • 169 MHz (136 – 240 MHz) Antenna • Ceramic Chip Antenna • 315 MHz (273 – 348 MHz) Antenna • CC-Antenna-DK • 433 MHz (387 – 510 MHz) Antenna • Dual Band Antenna (868 2440 MHz) • 868 MHz (779 – 960 MHz) Antenna • Mitsubishi Chip Antenna • 915 MHz (779 – 960 MHz) Antenna • Pulse Chip Antenna • 2440 MHz Antenna • Helical Wire Antenna • PCB Antenna • Pulse Helical Wire Antenna • Wire Antenna 1 Introduction The main purpose of the CC-Antenna-DK overview format. Terminology, antenna is to ease the decision for which type of characteristics, fundamentals of antenna low cost antenna can be implemented as design, and measurement procedures are well as give an estimation of the covered in the Antenna Selection Guide performance that can be achieved. [18]. For each antenna, a CTIA measurement summary is provided in this The frequency range of the antennas is report with a link to the full measurement from 136 MHz to 2480 MHz. The A4 sized CTIA report. DN6xx is designated for CTIA PCB panel contains 16 different boards; measurement reports. 13 antenna designs and 3 boards for Choosing the correct antenna for the calibration purposes. Each