基于UC3842的直流降压斩波电路设计_毕业论文(设计).doc

毕业论文（设计） 论文题目： 基于UC3842的直流降压斩波电路设计 目 录 TOC \o 1-2 \h \u HYPERLINK \l _Toc20438 前言 l _Toc24460 1 方案选择与论证 l _Toc1125 2 系统设计 l _Toc32604 2.1 系统设计要求 l _Toc24997 3 硬件电路设计 l _Toc21037 3.1 输入模块设计 l _Toc18336 3.2 反激式变压器设计 l _Toc10901 4 测试结果及结果分析 l _Toc11899 4.1 测试结果 l _Toc30824 4.2 测试结果分析[11] l _Toc17912 总结 l _Toc5808 参考文献： * MERGEFORMAT PAGE \* MERGEFORMAT 18 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 17 基于UC3842的直流降压斩波电路 学生：范俊（指导老师：刘团结） （淮南师范学院电气信息工程学院） 摘 要:为了研究基于UC3842的直流降压斩波电路，选择了以UC3842为脉宽控制核心的它激式反激型直流变换器方案，以研究24V到8V的降压变换为实例，详细了说明说明UC3842的用法，外围电路设计，以及反激直流变换器的直接降压斩波工作原理。能实现24V到8V的降压变换，输出功率也能达到10W以上，效率在80%以上。该方案里的UC3842可以直接驱动开关管，控制电路中的反激变压器。通过控制变压器器的工作方式，向负载提供电能。为了整体电路的稳定，又在输出端添加反馈电路。由PC817构成的反馈电路对输出电压采样，把输出电压反馈给UC3842，通过内部比较器，自动的调节脉宽，调节输出电压，以达到稳定。 关键词:它激式、直流变换器、UC3842 Dc buck chopper circuit based on UC3842 Student:Fan Jun(Faculty Adviser：Liu Tuan Jie) (Department of Electrical and Engineering, Huainan Normal Universit) Abstract：To study dc buck chopper circuit based on UC3842, chose the UC3842 as the pulse width control is the core of its shock type flyback type dc converter scheme, as to research in 24 v to 8 v step-down transformation as an example, detailed description the usage of UC3842, peripheral circuit design, and direct decompression of the flyback dc converter working principle of the chopper. Can achieve step-down transformation of the 8 v to 24 v, output can reach more than 10 w, efficiency is above 80%. The scheme of UC3842 switch tube, can be directly driven control circuit of the flyback transformer. By controlling the large transformer works, provide power to load. In order to the overall stability of the circuit, and add feedback circuit on the output side. Composed of PC817 feedback the output voltage sampling circuit, the output voltage feedback to UC3842, through the internal comparator, automatically adjust the pulse width of output voltage regulation, in order to achieve stability. Keywords：It shock type；DC converter ；UC38