CXM80超细粉碎系统设计与三维建模本科毕业论文.doc

Ⅰ 本科毕业论文 CXM80超细粉碎系统设计与三维建模 摘要：超细粉碎系统是将粉粒物料磨碎到粒径为微米级并进行分级的的系统。本文概要介绍了超细粉碎技术的发展、应用现状及存在的问题，简单介绍了目前典型的超细粉碎与分级设备；通过综合分析超细粉碎分级的技术现状和典型的超细粉碎生产工艺流程，针对CXM80超细分级磨，设计出了超细粉碎分级实验系统的总体方案。针对这个实验系统，选配了相对经济的实验系统配套设备，对实验系统的各设备进行了较合理的布局，设计出相应的管道将系统各设备连接起来，并且选用了相应的检测元件对喂料量、风量、粉尘浓度、电机转速进行检测。 在Pro/E三维建模工具的基础上，对整个实验系统进行了实体建模。 关键词：超细粉碎； 系统设计； 三维建模 CXM80 Ultrafine System’s Design and Three-dimensional Modeling Abstract: Ultrafine grinding is the operation which grinds powder materials to a particle size of micro-level. This article outlines the development of ultrafine grinding technology, applicat ion and problems, Briefly present a typical ultrafine grinding and classification equipment.By the comprehensive analysis of ultrafine grinding and classification of technical stat us of ultrafine grinding typical production process, for CXM fine grade grinding, we have designed the experimental system of ultrafine grinding classification. For this experimental system,matching the relative economic experimental system ancillary equipment. Carry out a more rational layout of experimental system of the device, Design the corresponding pipeline system connecting the various equipment and use the corresponding components of the feed test feedrate, the air flow, dust concentration, motor speed detection. Based on the 3D modeling tool Pro / E, we modeled about the entire experimental system. Key words: Ultrafine grinding, system design, three-dimensional modeling Ⅲ 目 录 摘要 Abstract 第1章 前言…………………………………………………………………………1 1.1 概述…………………………………………………………………………1 1.2 超细粉体技术的研究现状…………………………………………………1 1.2.1 国外研究现状………………………………………………………1 1.2.2 国内研究现状………………………………………………………2 1.2.3 超细粉碎技术的进展………………………………………………2 1.3 超细粉体的特性与应用……………………………………………………3 1.3.1 超细粉体的特性……………………………………………………3 1.3.2 超细粉体的应用领域………………………………………………3 1.4 超细粉碎现存的问题及发展趋势…………………………………………4 1.4.1 超细粉碎现存的问题…………………