基于PLC的自动药片装瓶机控制系统的设计毕业论文.docVIP

滨州学院本科毕业设计（论文） PAGE PAGE iii 毕业设计（论文） 题 目 基于PLC的自动药片装瓶机 控制系统的设计 系 （院） 专 业 班 级 学生姓名 学 号 指导教师 职 称 基于PLC的自动药片装瓶机控制系统的设计 摘 要 现行装药系统多为转盘式或电子计数式装药系统，其装药种类与包装方式存在局限性，在处理小型瓶装式流水线时，存在着计药数量不精确，成本较高等缺点。而本设计采用三菱公司PLC作为主控制器，通过PLC控制传送带步进电机、下药斗电磁继电器，并且通过IO口读入光电药片计数器的状态，实现分片装药功能。为了保证装药精度，使用了毛刷式下药斗作为下药机构，使用高速槽型光耦自行设计了光电传感器，在保证计数和下药精度的同时，使用了THB7128作为步进电机驱动器，在节约PLC的IO资源的同时，精确控制步进电机，实现传送带与下药斗的工作同步。为了提高整个系统的适应性，采用了多种装药数量组合搭配的综合输入设定方式，无需修改程序，即可通过外部按钮实现药片输入数量组合选择，提高了系统的适应性。 关键词：光电对管，步进电机，PLC The design of PLC-based Automatic tablet bottling machine control system Abstract The current charging system is the rotating disk or electronic counter type charging system, the types of loading and packing have limitations in dealing with a small bottle type line, the counting number is not accurate and the cost is high. This design adopts FXPLC as the main controller, it controls the conveyor stepper motor and the remedy to the case electromagnetic relay through the PLC, and reads the state of photoelectric counter pills through IO interface, implementing sharding charging function. In order to guarantee the loading accuracy, it uses a brush type remedy as a drugging agency, it also uses high-speed slot type optical coupling to design a photoelectric sensor. With the time of ensuring accuracy of counting and remedy to the case, it uses the THB7128 to drive the stepper motor, while saving the resources of PLC I/O, it controls the step motor accurately to achieve the goal of conveyor belt and remedy to the case of bucket working in sync. In order to improve the adaptability of the whole system, it uses a variety of charging quantity combination collocation tickets to enter setting mode. Without changing the program, it can be achieved by external button selection combination pill input number, improve the adaptability of the system. Key words: photoelectric tube, stepper motor, PLC 滨州学院本科毕业设计（论文） PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I 目 录 TOC \o 1-3