激光器驱动电路中英文翻译.docx

PAGE \* MERGEFORMAT 1 中文2540字 Laser driver circuit Small changes will directly semiconductor laser drive current to the output intensity fluctuation. To stabilize the output power semiconductor laser, Voltage negative feedback principle to design a constant current driving circuit comprises a soft starting and current limiting protection circuit based on; At the same time, according to the need of the light source is modulated to eliminate the influence of background light and, integrated laser modulation circuit comprises a crystal oscillation circuit and divider circuit design. Making the specific circuit and complete the relevant experimental. The experimental results show that the circuit can provide a driving current of high stability, Current stability up to 0.05%; Soft start and current-limiting protection circuit can protect the semiconductor laser and enhance the impact capability. Modulation circuit generates a carrier signal needed for laser diode modulation and direct to complete the output light modulation, The switch can be conveniently realized from 256Hz to 512kHz range of 12 kinds of commonly used modulation frequency selection. Semiconductor laser with its excellent characteristics, high efficiency, simple structure, small is widely used in scientific research, national defense, medical, and other areas of processing, its drive technology becomes more and more important. Semiconductor laser is the ideal electron - photon direct conversion devices, quantum efficiency is very high, the current small changes will lead to a great change, the output light intensity of the therefore, semiconductor laser drive current requirements is very high. Driving technology of semiconductor laser usually adopts constant current drive mode, this work, through the principle of negative feedback control loop, directly provide the effective control of the drive current. In addition, the transient current or voltage spikes, and overcurrent, overvoltage will damage the