GPIB仪器控制技术文件.pptVIP

Academic Seminar GPIB 仪器控制技术 仪器的发展历史 Road Map IEEE 488仪器控制标准 从 1975年就成为编程的标准 8位的并行协议 传输率低于1 Mbytes/s 标准电缆 最多控制14台仪器 有大量支持其标准的仪器 GPIB控制的领先者 GPIB 通信实例 NI-488.2 总线接口软件 高速设备驱动程序 IEEE 488.2 子程序 NI-488 函数 调试和开发工具 动态和交互设置 SRQ 处理 GPIB 实例 IBCONF GPIB 实例 IBIC 仪器的驱动程序 1000多种仪器的驱动程序 60多个厂商的产品 提供源程序 减少开发时间 利用LabVIEW进行频率响应的自动测量 仪器的图形用户界面设计 今天的仪器驱动程序 IVI - 可互换的驱动程序优越性 降低维护和支持费用 减少系统 时间开销 部门之间共享代码 方便/快捷地对仪器编程 仪器可互换性基本概念 五个基本的Class Driver 示波器 oscilloscope 数字万用表 DMM 函数发生器 Function Generator 开关 Switch 电源 Power Supply IVI 基金会成员 Boeing GEC Marconi test systems* GenRad Lockheed martin Lucent technologies* Marconi north America* (formerly GDE systems) National instruments* Northrop Grumman* Raytheon TI systems* *Founding members Thank You ! Controlling instruments with IEEE 488/488.2, RS-232, or VXIbus interfaces from LabVIEW is faster and easier with instrument drivers. An instrument driver is a high-level set of functions that initializes, configures, measures, or controls a particular instrument. The instrument driver automatically converts the configure or measure function into a low-level command string understood by the instrument and handles all GPIB, RS-232, or VXI hardware interface issues to send the command to the instrument. More than 300 IEEE 488, RS-232, VXI message-based and VXI register-based instrument drivers are available to developers. With instrument driver development and editing tools available in LabVIEW, users can build their own drivers or edit the source code of any existing LabVIEW instrument driver as needed. One of the major reasons Microsoft Windows has become the standard operating system for the PC is its common user interface for applications. Windows provides a graphical layer on top of DOS for intuitive, easy-to-use interfaces to applications, which make PCs usable to larger and larger markets. Naturally, as Windows gains favor on the PC, end-users want to take advantage of its GUI capabili