对废弃电子电器产品的环保要求(ppt 87)资料.pptVIP

Darryl Yun Darryl Yun Why WEEE Directive ? 为什么要有WEEE About 90% of the EEE waste is land-filled 90%的电子废弃物被填埋 Example 例子: Refrigerator Weight 冰箱重量: 100 kg (Category 1)Recovery Target 再生目标 : 80%Reuse / Recycling Target 再利用/循环使用目标: 75%Conclusion 结论: Disposal as Landfill 填埋处置: max. 20 kgRecovery as incineration 焚烧: max. 5 kgBack into resource stream 循环利用: minimum 75 kg — Lead used in compliant-pin VHDM (Very High Density Medium) connector system 顺应针(很高密度介质)连接系统中的铅 — Lead as a coating material for a thermal conduction module c-ring 热传导模块o形圈覆盖材料中的铅 — Lead and cadmium in optical and filter glass 光学和滤光玻璃中的铅和镉 — Lead in optical transceivers for industrial applications 工业用途的光学收发器中的铅 — Lead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors with a lead content of more than 85% in proportion to the tin-lead content (exemption until 2010) 微处理器的接脚和封装间的超过两个元素组成的连接焊锡中的铅,其铅含量超过85%比例 的铅锡合金. — Lead in high melting temperature type solders (i.e. tin-lead solder alloys containing more than 85% lead) and any lower melting temperature solder required to be used with high melting temperature solder to complete a viable electrical connection 高温型焊锡中的铅(如锡铅合金中的铅含量超过85%),和要求用于高熔化温度焊接以完成一可行的电连接的任何低温合金. — Lead in solders to complete a viable electrical connection internal to certain Integrated Circuit Packages (Flip Chips) (exemption until 2010) 焊锡中的铅是为满足某些集成电路(变址浮点运算芯片)有效可行的内部连接. — Article 4(1) substances in safety equipment for fire and rescue services. 第4(1)章中的物质在安全设备(火灾和营救服务)中. — Lead in lead-bronze bearing-shells and bushes 在铅-青铜轴承外壳和衬套中的铅 How to approach RoHS? 如何实施以满足RoHS  How to approach RoHS? 如何实施以满足RoHS Supplier Survey 供应商审核 Survey for every supplier must cover 针对每个供应商的审核必须函盖: