毕业设计九层电梯运行的控制.doc

毕业设计用纸 共 NUMPAGES 30 页 第 PAGE 3 页 摘要 电梯作为现代化的产物，随着社会的进步和发展，电梯的使用越来越普遍，电梯的功能越来越完善，电梯制造业的技术水平也逐渐与世界同步。由此，一个更为庞大的电梯市场已经在国内崛起。 本课题将采用VHDL语言、QUARTUS II软件实现一个常见的电梯控制系统，遵循方向优先的原则，该系统具备生活中电梯使用的基本功能，能够提前/延时开关电梯门，控制电梯运行开关，指示电梯运行情况、运行时间和所在楼楼层等。 本设计主要目标是实现对九层电梯运行的控制，源程序是基于Quartus II软件并用EDA语言编写的。具体是通过对显示模块、整体模块以及工程模块进行仿真，得到仿真的波形图，然后通过波形图的模拟实现控制电梯的运行。经过大量的波形图模拟以及对已有数据和工业生产的控制系统的实际数据比对发现，此次涉及的系统具有运行稳定、安全、便捷等功能，因此具有一定的实用价值。 关键词：电梯控制系统,VHDL,QUARTUS II ABSTRACT The lift, as the modernized result. Along with the social progress and development, the use of the elevator is becoming more and more common, elevator function more and more perfect, elevator manufacturing technology level is also gradually synchronized with the world.Thus, a much larger elevator in the domestic market has been rising. This subject will use VHDL language, QUARTUS II software to realize a common elevator control system, follow the direction of priority principle, this system has the basic function of elevator in common use，it can advance/delay switch elevator door, the control of elevator running switch, instructions, elevator running condition, running time and place building floors, and so on. This design main goal is to realize the running control of Nine elevator,my source program is designed with Quartus II which is based on written by EDA software language. The detail scheme is realized by simulating display module, whole modules and engineering module, then I can get the simulation waveform drawing, finally the simulation is used to control the fluctuations of elevators running. The system is approved to be safe、convenient and simple after a great deal of fluctuations of simulation and compareing with the actual data of industrial productions system , therefore I believe my design has certain practical value. Keywords: Elevator Control System ,VHDL, QUARTUS II 目 录 TOC \o 1-3 \h \z \u 19597 第一章 前言 5 20890 1.1问题的提出 5 5736 1.2设计目的 5 11917