普通车床的主轴箱（外文翻译）.docVIP

Headstock of Engine Lathe The headstock assembly is permanently fastened to the left end of the lathe. It contains the headstock spindle, which is rotated by gears or by a combination of gear and pulleys. The spindle holds the attachments which, in turn, hold and turn the workpiece. Spindles come in several quality ratings and are supported in headstocks by three to five bearings. Since the accuracy of the work done on a lathe depends on the axis of rotation of the spindle holding the workpiece, the spindle and all its accessories must be built and assemble with the greatest possible care. A h