基于Matlab的开关磁阻电机控制系统仿真建模研究.pdfVIP

Vol. 17 No. 4 系 统 仿 真 学 报 Apr. 2005 JOURNAL OF SYSTEM SIMULATION ·1015 · 基于Matlab 的开关磁阻电机控制系统仿真建模研究 纪志成，薛 花 （江南大学控制科学与工程研究中心电气自动化研究所, 江苏无锡 214036 ） 摘 要：在分析开关磁阻电机（SRM ）数学模型的基础上，提出了SRM 控制系统仿真建模的新方 法。在 Matlab/Simulink 中，建立独立的功能模块，如电机本体模块、速度控制模块、电流控制模 块、转角选择模块等，再进行功能模块的有机整合，搭建 SRM 控制系统的仿真模型。系统采用 双闭环控制：速度环采用PI 控制，电流环采用角位置控制与电流斩波控制相结合的方法，保证了 SRM 在低速或高速运行时都可获得满意的性能。仿真结果证明了该 SRM 建模方法的合理性、有 效性，为实际电机控制系统的设计和调试提供了新的思路。 关键词：开关磁阻电机 (SRM) ；仿真建模；Matlab；角位置控制 (APC) ；电流斩波控制 (CCC) 文章编号：1004-731X (2005) 04-1015-07 中图分类号：TM352 文献标识码：A Study on Modeling and Simulation of Switched Reluctance Motor Control System Based on Matlab JI Zhi-cheng, XUE Hua (Institute of Electrical Automatic, Control Science and Engineering Research Center, Southern Yangtze University, Wuxi Jiangsu 214036, China) Abstract: Based on the mathematical model of switched reluctance motor (SRM), a novel method for modeling and simulation of SRM control system based on Matlab has been proposed. In Simulink, the independent functional blocks, such as Moter model block, Speed controller block, Current controller block, Angle selection block, ect., have been modeled. By the organic combination of these blocks, the model of control system can be established easily. In the double loop of control system, a PI controller is adopted in the speed loop and a compound current controller is adopted in the current loop. In order to obtain expected performance, above base speed a speed angular position controller works in current closed-loop, and below base speed a current chopping controller works. The reasonability and validity