20XX年滑移式起重夹钳装置主机的加工工艺设计.doc

PAGE II PAGE I 摘 要 机械夹钳机构是机械制造装备的重要组件,当夹钳机构钳口开口因夹持不同尺寸大型工件而有较大变化时,存在夹持力波动很大的情况,因而很难保证夹持的可靠性,甚至造成夹持机构功能失效。 本文详细介绍了夹钳装置设计过程和一些零件加工工艺方法,快速成型加工和数控加工，薄壁零件在加工过程中容易变形,加工精度难以保证,如果能采用合适加工工艺,完全可以解决这一问题。矚慫润厲钐瘗睞枥庑赖賃軔朧碍鳝绢懣硯涛镕頃赎巯驂雞虯从躜鞯烧论雛办罴噓剥淚軔琿閔馐虯圓绅锾潴苏琺锅苁。 本文针对典型的轴类零件数控加工工艺的分析,给出了对于一般零件数控加工工艺分析的方法。 关键字：夹持力；夹钳装置；加工工艺设计；夹钳强度 ABSTRACT The mechanical clamping mechanism is an important component part of mecha nical manufacturing equipment. There exists a situation of large fluctuation in clamping force while the vice jaw opening of clamping mechanism has rather large variations on account of clamping large-scaled work-pieces of different dimensions, therefore it is very difficult to ensure the reliability of clamping or even causing failure on the function of clamping mechanism. 聞創沟燴鐺險爱氇谴净祸測樅锯鳗鲮詣鋃陉蛮苎覺藍驳驂签拋敘睑绑鵪壺嗫龄呓骣頂濺锇慪柠圖虬辏獨鰷濱賺钓崳。 The processing method and jig designing process of some cylinder body were introduced. In the processing of thin wall cylinder components, they are easy to distort, so it is very difficult to guarantee the precision. 残骛楼諍锩瀨濟溆塹籟婭骒東戇鳖納们怿碩洒強缦骟飴顢歡窃緞駔蚂玨础对聳卻錨纩鳅抛蒉詣赅齦鸸餌螞妪麩轰鍍。 At last，technology analysis is very important, on the basis of analyzing technologies of shaft components' NC processing, the methods of usual components' NC processing technologies were given out, which was significant for actual manufacture and enhancing products' quality.酽锕极額閉镇桧猪訣锥顧荭钯詢鳕驄粪讳鱸况閫硯浈颡閿审詔頃緯贾钟費怜齪删费龙觯諞餛鸬挣紐攄线幀鲑泽谶绗。 Keywords：clamping force；Clamping devices；processing craft designing；shaft components process彈贸摄尔霁毙攬砖卤庑诒尔肤亿鳔简闷鼋缔鋃耧泞蹤頓鍥義锥柽鳗铟夺髅搅联黨莢蠷抛務槍渖鐋颠聶鹭铹釹诫诎響。 目 录 TOC \o "1-2" \h \z \u 摘 要 I謀荞抟箧飆鐸怼类蒋薔點鉍杂篓鳐驱數硯侖葒屜懣勻雏鉚預齒贡缢颔臉悭榇龟伤确妫閽缮该賴爐满鐵薺硷蓝骤蚂釗。 ABSTRACT II厦礴恳蹒骈時盡继價骚卺癩龔长鳏檷譴鋃蠻櫓鑷圣绋閼遞钆悵囅为鹬饲綣渍骯為棟轾緝駐鴕僥饬鋏伥压举猶斕脚盏。 1 前言 1茕桢广鳓鯡选块网羈泪镀齐鈞摟鳎饗则怿唤倀缀倉長闱踐識着純榮詠橱释环东黲奁榿嚙熗灩盐绑擾毁诶請屦蠆绷傖。 1.1 起重夹钳国内外发展情况 1鹅娅尽損鹌惨歷茏鴛賴縈诘聾諦鳍皑绲讳谧铖處騮戔鏡謾维覦門剛慘貽专秃胜鹃龄鬧酽铈趸釓丧贪蔼嶁攄鳝頊简賕。 1.2 起重夹钳加工的发展情况 3籟丛妈羥为贍偾蛏练淨槠挞曉养鳌顿顾鼋徹脸鋪闳讧锷詔濾铩择觎測馮夢织個鱉韋禅珑怃傧嘔蛻哙镑轅阖鉈归疯涝。 1.3 研究的主要内容及解决的主要问题 3預頌圣鉉儐歲龈讶骅籴買闥龅绌鳆現檳硯遙枨纾釕鴨鋃蠟总鴯询喽箋纣莴缬膾鲠郐鸳鼴該礎组堊鶯廁