动叶片烧伤缺陷分析与解决方案.doc

PAGE PAGE 1 烟气轮机动叶片磨削烧伤的解决方案 焦多荣 熊永超 （中国石油兰州石油化工公司 甘肃 730060） 摘 要： 通过对加工程序的进给量、砂轮的修正量、冷却喷嘴的位置及喷嘴口尺寸的调节，解决了烟气轮机动叶片榫齿表面烧伤问题，其可行性在加工实践中的到了证明。 关键词：动叶片榫齿 表面烧伤 进给量 砂轮修正量 冷却喷嘴 Abstract: Adjusting both the forwarding value of the procedure and correcting value of the grinding wheel as well as the position and dimension of the cooling nozzle, anchoring teeth outer burning of the dynamic blade on the gas expander can be perfectly solved. Practice proves its effectiveness. Key word: Anchoring teeth of the dynamic; Outer burning; Forward value; Corrected value of the grinding wheel; Cooling no