CMB培训-数据分析与连续监控.pptVIP

连续监控与连续审计（续） 增强规避风险的能力 减少内部控制评估的成本 提高了审计效率 增加了收益率 能够对所有交易开展实质性测试 提高了财务发现结果的可信度 减少财务错误以及潜在的舞弊 For information on applying this template onto existing presentations, refer to the notes on slide 2 of this presentation. The Input area of the Beam can be customized to reflect the content of thepresentation. The Input area is an AutoShape with a picture fill. To change this, ensure you have the image you wish to use (ideally a .jpg or a .png file) in an accessible folder. The image should have a ratio of 1:1 to ensure it does not appear distorted. Acceptable images for importing into the Input area of the Beam are the three approved graphics (lines), and black and white photography or illustrations which follow the principles laid out on The Branding Zone. Color images should never be imported into this area. To create a thank you slide with a picture in the Input area of the Beam, duplicate this master slide and create a new master slide. If using the graphic on the title slide the same should be used on the thank you slide. If using a picture in the Input area of the Beam in the title slide, the same or different but related picture can be used on the thank you slide. Customize the Input area of the Beam as described below. Click on the View tab from the menu bar and select MasterSlide Master Right-click on the Input graphic and select Format AutoShape From the Fill menu, under the Color and Lines tab, click on the drop-down arrow next to Color and select the Fill Effects menu From the Picture tab, click on Select Picture. Navigate to the folder containing the image you wish to insert in the Input area. Highlight the image and tick the Lock picture aspect ratio box. Click on OK. You can now preview the image before continuing. If you are happy with how it looks, click OK to continue. Otherwise, repeat the process until you are happy with your selected image To exit from Master View, click on ViewNormal. The change you made to the Input graphic should now be visibl