刘晓宇_CDEM的流固耦合和块体破裂模型.pptVIP

* In order to deal with incomplete fracture geometry information in field surveys, we adopt the stochastic Monte-Carlo approach. This approach assumes that the input fracture data used to generate the fracture-block system, such as orientation and trace length, obey the geostatistical distributions, while the distributions are statistically derived from field measurements. Using the stochastic Monte-Carlo approach, we can reproduce the input fracture data in the study domain. * In order to deal with incomplete fracture geometry information in field surveys, we adopt the stochastic Monte-Carlo approach. This approach assumes that the input fracture data used to generate the fracture-block system, such as orientation and trace length, obey the geostatistical distributions, while the distributions are statistically derived from field measurements. Using the stochastic Monte-Carlo approach, we can reproduce the input fracture data in the study domain. * In order to deal with incomplete fracture geometry information in field surveys, we adopt the stochastic Monte-Carlo approach. This approach assumes that the input fracture data used to generate the fracture-block system, such as orientation and trace length, obey the geostatistical distributions, while the distributions are statistically derived from field measurements. Using the stochastic Monte-Carlo approach, we can reproduce the input fracture data in the study domain. * * 均质土坡，坡高H=20m，坡角?=30?，杨氏模量E=100MPa，泊松比?=0.3，容重?=20kN/m3，内聚力C=30kPa，内摩擦角?=15?。边坡左右两侧边界为法向约束，底边为双向固定约束。 Time Step: 120000 Time Step: 200000 Time Step: 240000 Time Step: 280000 Time Step: 320000 Time Step: 360000 相关资料 张丽, 刘晓宇, 李世海. 裂隙岩体稳定/非稳定渗流数值模拟, 岩石力学与工程学报, 2009(9), 28, Supp.2 3409-3416. X.Y. Liu, Y. Liu and S.H. Li. Modelling of Hydro-mechanical Coupling for Fractured Rocks. Proceeding of International Symposium/RCUK-China Summer School on Discrete Element Methods and Numerical Modelling of Discontinuum Mechanics, pp 288-302, 2008/9/24. 韩永臣, 刘