SHS-03044-92（英文版）高速离心泵维护检修规程.doc

PAGE PAGE 9 The Chinese version of standards has precedence to their English translations which are only for internal reference. 本英文版为内部资料，仅供参考，以中文版为准。 Maintenance and Service Procedure for Petrochemical Equipment –Chemical Equipment Maintenance and Service Procedure for High-speed Centrifugal Pump (高速离心泵维护检修规程) SHS 03044-92 (For Trial Implementation) Promulgated by SINOPEC SINOPEC Publishing House Contents 1. General 2. Period and Content of Maintenance 3. Maintenance and Quality Standard 4. Trial Running and Acceptance 5. Service and Troubleshooting 1. General 1.1 Subject content and applicable scope 1.1.1 Subject content This Procedure specifies the period and content of maintenance, maintenance and quality standard, trial running and acceptance and service and troubleshooting for high-speed centrifugal pumps. 1.1.2 Applicable scope This Procedure is only applicable to the maintenance and service of Type LMV/BMP-311, LMV-331 and LMV-322 high-speed centrifugal pumps. 1.2 Reference documents for compilation a. SHS 01002-92 “Management System of Lubrication of Petrochemical Equipment”; b. SHS 01003-92 “Vibration Standard for Rotating Petrochemical Machinery”; c. SHS 01028-92 “Maintenance and Service Procedure for Variable Speed Motor”; d. SHS 03059-92 “Maintenance and Quality Standard for General Parts of Chemical Equipment”; e. Technical documents supplied with the equipment; f. HGJ1023 “Maintenance and Service Procedure for High-speed Pumps used in Chemical Plant”. 2. Period and Content of Maintenance 2.1 Period of maintenance (refer to Table 1) Table 1 Month Category of Maintenance Minor Maintenance Medium Maintenance Overhaul Period of Maintenance 6 12 36 Note: The period of maintenance may be adjusted appropriately with complete monitoring devices and approval of relevant management. 2.2 Content of maintenance 2.2.1 Minor maintenance a. Check and clean oil circuit, cooling liq