精轧机组F1轧机主传动系统设计.docVIP

本科毕业设计 题目： 精轧机组F1轧机主传动系统设计 学 院: 机械自动化学院 专 业: 机械电子工程 学 号: 学生姓名: 指导教师: 日 期: PAGE PAGE I 摘 要 精轧机作为轧制过程中最后一道轧制过程，对轧件的性能影响较大。精轧机在轧制过程中不仅要对轧件的宽度厚度进行控制，还对产品其他性能进行监测。对于热轧机，轧机还要承受高温影响。为保证轧件的产品要求，轧机的主传动系统必须保证良好的传动要求及品质要求。目前由于科技水平的不断进步，轧机在各方面性能都不断进步，为钢铁公司创造了不斐的收益。 F1精轧机主传动系统是将电机输出转速通过减速或增速来实现工作要求。本次设计根据需求采用减速方案，采用单级斜齿轮传动，传动过程简单，减少了功率的损耗，同时也保证了较高的传动精度，采用斜齿轮传动在一定程度上增加了传动强度；降低了维修的困难度。此次设计的最主要的目标是对轧机有更深层次的了解，与此同时还需要对传动系统进行设计和核算并了解其他各种部件的选择原理。 最后根据设计的尺寸参数，绘制减速机的装配图和关键零部件的零件图，来更深一步的了解减速机内部的结构。 关键词： 精轧机； 主传动系统； 减速箱； 齿轮 Abstract As the last rolling process in the rolling process, finishing mill has a great influence on the performance of the workpiece. In the process of rolling, the finishing mill not only controls the width and thickness of the workpiece, but also monitors the other properties of the product. For hot rolling mills, the mill also suffers from high temperatures. In order to ensure the product requirements, the main drive system of rolling mill must ensure good transmission requirements and quality requirements. At present, due to the continuous progress of the scientific and technological level, the rolling mill in all aspects of performance are constantly improving, Steel Corp has created an tremendous income. The main drive system of F1 finishing mill is to realize the output speed of the motor by slowing or increasing speed. This design according to the demand of the reduction scheme, using the single stage helical gear transmission, the transmission process is simple, reducing the power loss, but also to ensure the higher transmission precision, using helical gear transmission intensity increases to a certain extent reduces the difficulty of maintenance. The main purpose of this design is in the sake of having a deeper understanding of the mill, and to design and calculate the drive system, and to understand the selection principle of other components. Finally, according to the design of the size parameters, draw the reducer assem