生产线中自动往返自动传送单元系统设计本科毕业设计.docVIP

PAGE III 生产线中自动往返自动传送单元系统设计 摘 要 随着我国工业事业的蓬勃发展，生产自动化的应用也越来越广泛，规模也不断的扩大，所以生产线中自动往返传送单元系统设计也是一个重要的工作。 生产线中自动往返传送单元系统中的重点就是PLC控制，PLC控制是目前工业上最常用的自动化控制方法，由于其控制方便，能够承受恶劣的环境，因此，在工业上优于单片机的控制。PLC将传统的继电器控制技术、计算机技术和通信技术融为一体,专门为工业控制而设计,具有功能强、通用灵活、可靠性高、环境适应性强、编程简单、使用方便以及体积小、重量轻、功耗低等一系列优点,因此在工业上的应用越来越广泛。 本文主要讲述在生产线中自动传送单元分拣系统中PLC的应用，利用可编程控制器( PLC) ,设计成本低、效率高的自动传送单元自动分拣装置。以PLC为主控制器,结合气动装置、传感技术、位置控制等技术,现场控制产品的自动分拣。该系统具有自动化程度高、运行稳定、精度高、易控制的特点,可根据不同对象,稍加修改本系统即可实现要求。 关键词: 可编程控制器，分拣装置，控制系统，传感器 The automatic production line and automatic transmission unit system design ABSTRACT With Chinas industrial enterprise of booming development, production of automatic application more and more widely, and enlarging the scale, so the automatic production line and automatic transmission unit system design is also an important work PLC control is the most commonly used industrial automation control method, because of its convenient control to withstand an adverse environment, it is better than MCU control in the industrial. PLC traditional relay control technology, computer and communication technologies are integrated specifically for industrial control and design, have strong function, common flexible, high reliability and environmental adaptability, and programming simple, easy to use and small size, light weight, a series of low-power advantages in industrial applications become more extensive. This paper focuses on the PLC in the canned beverage production, The design of an automatic sorting device with low cost and high efficiency is presented in the paper, which regards programmable logic controller ( PLC) as the master controller and combines pneumatic device, sensing technology, position control and other technology to implement automatic selecting of the products live. The device is characteristic of high automation, steady running, high precision and easy control, which can fulfill the requirement according to different situations with little modifications. Key words：