编织型地铁出入口的结构设计要点.pdfVIP

  • 2
  • 0
  • 约8.8千字
  • 约 4页
  • 2020-02-11 发布于山东
  • 举报
编 织 型 地 铁 出入 口的 结构 设 计 要 点 高银鹰 (中国建筑设计研究院 北京 100044) (ChinaArchitectureDesignandResearchGroup,Beijing100044,China) [摘要]编织型地铁出入I:7为地上单层建筑,采用梁、柱、斜杆组成的全焊接编织型方管钢结构形式。与 已建地下工程相接部位采用钢筋植筋相连接 ,并 以已建结构作为基础 ;其余部位采用天然地基条形基础 加防水板基础形式。根据计算及基础情况,竖向构件采用不同的柱脚形式,以方便施工。 [关键词]编织型钢结构 钢筋植筋 钢结构焊接 锚栓 ABsrIRACT:Theentwiningsteelentrartcebuildingofthesubwayhassingle—layer.Thissteelstructureconssitsof beams,columnsandslopebarsconnectedbywelding.Thebuilding isconnectedwiththe existingstructureunderthe ground thetec

文档评论(0)

1亿VIP精品文档

相关文档