ZSQ气动活塞式切断阀.docVIP

上海高特自动化仪表厂 调节阀样本 - PAGE 1 - ZSQ气动活塞式切断阀 ZSQ pneumatic piston shutoff valves 产品概述 General ZSQ气动活塞式切断阀(简称活塞式切断阀)，是气动单元组合 仪表中的执行单元。它接收来自调节仪表的信号，控制工艺管道 内流体的切断与接通或切换流道。该产品具有操作力大，阀体设 计新颖，流阻小、额定流量系数大、许用压差大、密封性能优良 等优点。因而广泛应用于石油、化工、冶金、电力、轻纺等工业 部门的生产过程自动控制与远程控制系统中。 ZSQ Pneumatic piston shutoff valves, as the execution unit of the pneumatic unit combined instruments, can be operated by receiving the signals from the regulating instruments to shut off, switch on and switch the flow channels. It features large operating force, modern body design, low flow resistance, large rated flow coefficient, large allowable differential pressure, excellent seal property. It’s widely used in the automatic control and remote control system for the production process in the industries including petroleum, chemistry, metallurgy, power and light industry. 产品特点 Features 气动活塞式切断阀由气动活塞式执行机构与直行程调节机构二部分组成，中间由支架连接而成。根据调节机构的型式，气动活塞式切断阀可分为直通单座切断阀(ZSQP型)、直通套筒切断阀(ZSQM型)、二位三通切断阀(ZSQN型)三种型式。气动活塞式执行机构有单作用(弹簧复位)和双作用(双进气)二种。采用单作用执行机构，整机作用方式可分为气关式(水平管路接通)和气开式(水平管路断开)。气动活塞式切断阀有硬密封和软密封两种密封形式，分别适用于不同的温度及压力。 The pneumatic piston shutoff valve comprises a pneumatic piston actuator and a liner regulator, between which theres a yoke to connect them. According to the regulator type, the pneumatic piston shutoff valves fall into straight-way single-seated shutoff valves (ZSQP type), straight-way sleeve shutoff valves (ZSQM type) and 2/3 way shutoff valves (ZSDN type). The pneumatic piston actuators include single-acting type and double-acting type. For single-acting actuators, the acting types of the unit includes pneumatic closing type (Horizontal pipeline on) and pneumatic opening type (Horizontal pipeline off). The pneumatic piston shutoff valves use the metal seal and resilient seal for different temperature and pressure.????当信号压力为零，由于弹簧(单作用仅有)的预紧力，使阀芯处于初始状态(常开或常闭)。当执行机构接到信号压力(0.4～0.6MPa)时，活塞上产生推力，压缩弹簧，带动推杆、阀体、阀芯移动到极限位置，使阀门全开或全关。达到对管道内介质接通、切断或管路间切换控