基于51单片机交通灯程序完整版.docVIP

. . #includereg52.h#include intrins.h #define uchar unsigned char#define uint??unsigned?int bit?????Flag_SN_Yellow; //SN黄灯标志位bit?????Flag_EW_Yellow;//EW黄灯标志位uchar?Time_EW;//东西方向倒计时单元uchar?Time_SN;//南北方向倒计时单元uchar EW=15,SN=10,EWL=19,SNL=19; //程序初始化赋值，正常模式uchar EW1=60,SN1=40,EWL1=19,SNL1=19;//用于存放修改值的变量?uchar Flag_Moden=1;????//模式变量 1正常模式??2 禁止南北通东西??3 禁止东西通南北??4 禁止东西南北 5 夜间模式uchar Flag_key=0; uchar code table[10]={0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F};//1~~~~9段选码sbit HC164_Data =P0^0;sbit HC164_Clk =P0^1;sbit EW_green =P0^2;sbit EW_yellow =P0^3;sbit EW_red =P0^4; sbit SN_red =P0^5;sbit SN_green =P0^7;sbit SN_yellow =P0^6; sbit SN_RXD_red =P2^7;sbit SN_RXD_green =P2^6;sbit EW_RXD_red =P2^5;sbit EW_RXD_green =P2^4; sbit FMQ = P1^0; sbit key1 = P3^3;sbit key2 = P3^4;sbit key3 = P3^5; sbit WEI1 =P2^3;??// 东西数码管第一位sbit WEI2 =P2^2;??// 东西数码管第二位sbit WEI3 =P2^1;??// 南北数码管第一位sbit WEI4 =P2^0;??// 南北数码管第二位 //uchar ew=40;sn=35;//函数??delay(uchar z)//功能能??延时 void Delay(uchar z){?uchar a,b;?for(a=z;a0;a--)??for(b=200;b0;b--);?} void HC_164_Set_byte(uchar duan){?uchar i;?for(i=0;i8;i++){ ??HC164_Data =duan 0x80;????HC164_Clk =0;??HC164_Clk =1;??duan =duan 1;?}}void display_smg(uchar wei,uchar num){??switch(wei){??case 1:?WEI1=0;WEI2=1;WEI3=1;WEI4=1;HC_164_Set_byte(table[num]);break;??case 2:?WEI1=1;WEI2=0;WEI3=1;WEI4=1;HC_164_Set_byte(table[num]);break;??case 3:?WEI1=1;WEI2=1;WEI3=0;WEI4=1;HC_164_Set_byte(table[num]);break;??case 4:?WEI1=1;WEI2=1;WEI3=1;WEI4=0;HC_164_Set_byte(table[num]);break;??default: break;?}} void?Display(void)?{??uchar h,l;??h=Time_EW/10;??l=Time_EW;??display_smg(1,h);??Delay(8);??display_smg(2,l);??Delay(8); ??h=Time_SN/10;??l=Time_SN;??display_smg(3,h);??Delay(8);??display_smg(4,l);??Delay(8); } ?void Key()?{???if(key1==0){???Delay(10);??????if(key1==0){????while(!key1);?????Flag_key++;?????if(Flag_key==1)?{????????Flag_Moden=2;????}?????if(Flag_key==2)?{????????Fla