软件系统项目验收报告模板 英文版Acceptance Plan.doc

Customer Name Here 1 - PAGE 2 - Version 1.2 DATE \@ M/d/yyyy 10/6/2004 Acceptance Plan Acceptance Plan Customer Name Here Abstract This document describes the criteria for acceptance of a deployed wireless network. Each item to be tested will be called out, along with a detailed description of success.  TOC \o 1-3 \h \z \u Table of Contents Customer NAME HERE 1 Executive Summary 3 Test 1: Connectivity 5 Test 2: Employee Authentication 7 Test 3: Guest Authentication 9 Test 4: Data Privacy 11 Test 5: Application Support 13 Test 6: Roaming 15 Test 7: Management 17 Test 8: Monitoring 21 Test 9: Intrusion Detection 23 Test 10: Performance 25 Testing Sign-off Sheet 28 Executive Summary Overview This section provides a brief overview of the acceptance criteria required for final acceptance of a deployed wireless network. Requirements for success The following is a list of the minimum features that must be provided by the wireless network: Connectivity by wireless clients Security of employee access (authentication) Security of guest access (authentication) Privacy of data (encryption) Application support Roaming support Wireless management (network and devices) Wireless monitoring (network and devices) Intrusion detection and protection Each of these items consists of a series of individual tests that must be completed before acceptance. The rest of this document provides detailed descriptions of each requirement and the criteria for successful completion. Test 1: Connectivity Overview This section describes the connectivity tests required for final acceptance of a deployed wireless network. Connectivity criteria Connectivity is the ability to provide wireless network “dial tone” on demand, to any qualified client. Connectivity allows a client to do the following: Associate with an Access Point (AP) Acquire an IP address/configuration Perform basic network operations (as permitted by security mechanisms) – e.