DBL 8465-2016-06奔驰塑胶电镀标准.pdf

Mercedes-Benz DBL 8465 Company Standard Date published: 2016-06 Supersedes: DBL 8465:2011-06 Transition period: 0 months Total no. of pages (including annexes): 17 Person in charge: Martin Falkenecker Plant: 050; Dept.: TF/VBT Date of translation: 2016-07 Phone: +49 (0) 7031 90 70475 Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings Foreword This DBL specifies the special requirements for electroplated coatings on platable plastic materials. The coatings are intended to provide decorative component surfaces. Application note: In line with the scope, application of the present version of this Standard is binding for new vehicle projects or components for which no concept/basic specifications or component requirement specifications have been approved yet at the date of issue of this version. The respective contract documents regulate the mandatory application of the present version of this Standard by the supplier. Changes In comparison with edition 2011-06, the following changes have been made: Nomenclature changed Section 8 restructured New PVs added 11/ 17/ 18/ 21/ 22/ 23/ 41/ 42 PVs 15/16/20/40 are blocked for new designs NOTE: This translation is for information purposes only. The German version shall prevail above all others.