脉动液压成形条件下管材塑性硬化规律的分析.pdfVIP

Abstract Abstract Tube hydroforming (THF) technology is the significant approach to realize lightweight of auto parts, owing to the low cost in manufacturing, low weight and high strength of products. Tube pulsating hydroforming technology is a novel technique that applies the pulsating hydraulic pressure with varying frequency and amplitude to deform tube metal. As a hot research spot in THF, it is expected becoming a new technology to improve the formability of the tube. The plastic hardening model of tubular material is essential for the analysis of deformation mechanism, and the performance of precision finite element (FE) simulations of tube hydroforming. Therefore, it has the important theoretical significance for the research on plastic hardening of thin-walled tubes in pulsating hydroforming. In present study, (1) a method, based on the mechanical model of tube hydraulic forming, the plastic incremental theory and principle of plastic deformation work, was proposed to determine the plastic hardening model of a tube in THF. (2) The pulsating hydroforming tests (a variety of frequency and amplitude) and the non-pulsating hydroforming test (frequency and amplitude are equal to zero) of a SS304 stainless steel tube were carried out continuously. And the deformation data on the bulged region of tube were obtained. (3) The plastic hardening relationships of tube were determined according to the deformatio