各种脱硫烟囱及烟囱内筒防腐方案的分析.docVIP

各种脱硫烟囱及烟囱内筒防腐方案的分析 脱硫烟囱防腐连载（三） 江先龙，钱永嘉，杨华，周国友，张明，陈方 （常州华科树脂有限公司，常州，213102） 摘要：本系列连载文章对烟气脱硫烟囱腐蚀特点、防腐蚀必要性、防腐蚀材料及方案、防腐蚀标准进行了详细的介绍。本文为连载第三部分“各种脱硫烟囱及烟囱内筒防腐方案的分析”，主要从技术角度对目前市场上脱硫烟囱各种防腐方案进行了对比，主要涉及有：乙烯基酯树脂玻璃鳞片胶泥、乙烯基酯树脂胶泥玻璃钢复合、乙烯基酯树脂胶泥勾缝砖板衬里（含泡沫玻化砖、耐酸砖、耐酸陶瓷等方案）、耐酸KP-1胶泥、KP-1胶泥勾缝砖板衬里、OM涂料、钛合金复合合金板、“混元体”方案、环硅聚合物杂化方案、萨维真柔性喷涂内衬方案、PFA可焊接聚四氟乙烯塑料内衬、玻璃钢挂片拼接方案、整体玻璃钢方案等。 关键词：烟气脱硫、烟囱、防腐、玻璃鳞片胶泥 Analysis of Various Anti-corrosion Solutions For Desulfurization Stack FGD Stack Anti-corrosion Articles(Part III) Jiang Xianlong,Qian Yongjia, Yang Hua, Zhou Guoyou, Zhang Ming, Chen Fang (Changzhou Huake Resin Co., Ltd. Changzhou, 213102,China) Abstract: This series of articles mainly focus corrosion properties of FGD stack, necessity of FGD stack anti-corrosion engineer, anti-corrosion materials and stack anti-corrosion standards. This Part III is “Analysis of Various Anti-corrosion Solutions For Desulfurization stack”. From a pure technical point of view, this paper introduces and compares a variety anti-corrosive strategies of desulfurization stack in domestic market, these strategies are mainly the following as: vinyl ester resin glass flake compound liner, combination of vinyl ester resin glass flake compound and FRP, brick lining board with vinyl ester resin glass flake compound(including foam tiles, acid-resistant bricks, acid-resistant ceramic tiles), acid-resistant KP-1 clay, brick lining board with KP-1 clay, OM coatings, titanium alloys, Hun Yuan body method, ring silicon polymer hybrid materials method, SAUEREISEN flexible liner spray method, PFA weldable Teflon plastic liner, FRP coupon splice method, the whole FRP flue and stack method. Key Words: FGD, Stack, Anti-corrosion, Flake compound. 0 引言 由连载文章（一）、（二）可知：强腐蚀环境，并且伴随着干湿交变、温度交变，这就是脱硫后烟囱内筒所处的环境，因此务必对烟囱内筒或整个烟囱进行防腐处理。连载（二）中脱硫烟囱内衬防腐方案考虑的核心点：防腐、抗渗、防脱落。防腐由材料本身材质的耐酸性，尤其是高温下的耐酸性决定的；抗渗主要由防腐层厚度、有机/无机成份固化物的致密性决定的；防脱落主要由施工质量优劣、基材处理好坏、防腐层本身的耐温骤变性能优劣、防腐层的耐应力变化优劣决定的。 防腐材料要求与清洁处理后烟囱砖内筒有良好的粘结和覆盖作用，防腐层应 【联系作者】 江先龙，常州华科树脂有限公司ouyang